REPEAT PLAY ALL SONGS
To repeat ALL SONGS on a disc and play
them again and again.
1. Press REPEAT Button twice.
2. The REPEAT indicator will be on steady
(not flashing).
3. Press PLAY Button.
All the songs on the CD will play in order
and then start all over again.
4. To end the Repeat Function, press
REPEAT Button once.
5. To stop play, press STOP Button.
10. CASSETTES
CASSETTE TAPE SELECTION
The quality and condition of the cassette tapes you use will have a direct effect on the
performance of the cassette tape player.
Low quality tapes tend to break and stretch and a broken tape can easily become entangle
in the drive mechanism, causing major damage. Stretched tapes will run at uneven speeds
and will distort anything recorded on them.
Use only well-known brands of tapes.
Use of C-120 (120 minutes) cassette is not recommended. The extreme thinness of
this tape may result in breakage or other failures.
This set is not designed for CrO2, Fe-Cr or METAL tape use. Therefore, be sure to use
named brand normal cassette tapes.
h
h
h
TO PLAY A CASSETTE TAPE
AUTOMATIC LEVEL CONTROL (ALC)
This product utilizes the latest Automatic
Level Control circuitry, therefore, it is not
necessary to adjust the Volume Control
when recording. This circuit automatically
records at the correct level and prevents
over loading.
NOTE:
While recording you may adjust
the Volume Control as desired
without affecting the recording
operation.
9. RANDOM PLAY OPERATION
x 2
x 1
Press the Random button once, the unit will
playback the disc in a random order. After all
the tracks are played the unit will stop
automatically.
In CD stop mode, you have to press the
play/pause button after pressing the
random button to begin random playback.
Press the Random button again to cancel
this play model.
1. Open the Cassette Door by pressing the
Cassette STOP/EJECT Button (in some
cases, you may have to press the
Cassette STOP/EJECT Button twice
since this button has combined functions
of stop and eject.)
2. Insert the cassette,
with the exposed
tape facing upwards, into the tracks in
the Cassette Door - the full reel or spool
should be on the right side.
3. Close the Cassette Door.
4. Check the position of the FUNCTION
Switch to make sure it is in the TAPE
position.
5. Press the Cassette PLAY Button.
6. Adjust the VOLUME Control to your
listening taste.
7. To stop the tape manually, press the
Cassette STOP/EJECT Button.
8. To remove the cassette, press the
Cassette STOP/EJECT Button again
and the Cassette Door will open.
Unload the cassette tape, flip it and return to
cassette compartment if you want to play
the other side of the cassette tape.
If the PLAY Button pops up, the
tape has reached the end.
Remove the tape, flip it to the
other side and re-insert and press
PLAY Button.
NOTE:
