10
OPERATION THE TELEVISION RECEIVER
If the tv set is one system only, press this button there will be shown “ - ” on
screen, but there will be no function.
OPERATING WITH REMOTE CONTROL
TO SELECT TV STATION USING THE PROGRAM NUMBERS:
1.
Program Number Up and Down
Press the CH. " " or " " button to select a higher or lower program number.
2.
0 - 9 Digital Button
To select TV stations using program numbers 0 - 9, selecting program number will be
shown in the left corner of the top of screen in yellow colour.
For example:
Press "9" digit button to select program "9".
3.
Two Digital Program Number
To select TV station using program numbers "10" - "89".
For example: selecting program 12
* Press the button "-/- -"
*Then press the number "1" button, on screen will show "1-"
* Then press the number "2" button, channel "12" will show.
4.
Previous Program Button (P P)
Press (P P) button to select the previously viewed program number.
Stand-By Button (
)
•
Press the "
" button to switch OFF the picture and sound.
•
To switch on the TV from stand-by mode, just press any desired program number (0-9).
Sleep Timer (
)
•
The TV set can switch OFF automatically in 15 minute intervals upto 120 minutes. When the
SLEEP button is pressed, the screen display will show " " in red colour and the set time in
yellow colour. Keep pressing the button till the desired set time appears.
•
Any time you briefly press the SLEEP TIMER button, the display will show the residual time.
To cancel the setting of sleep time, press the SLEEP TIMER button until display show "SLEEP
OFF".
Mute Button (
)
•
Press the "
" button to switch OFF the sound, press once again to switch ON the sound.
P1420-GTV34RDVD.p65
2002/10/30, PM 09:13
10