Basic Connection
n
Ensure that this player and other equipment to be connected are set to the standby mode or off and disconnect the AC
power cords before commencing connection.
n
Do not block ventilation holes of any of the equipment and arrange them so that air can circulate freely.
n
Read through the instructions before connecting other equipment.
n
Ensure that you observe the color coding when connecting audio and video cables.
Note:
n
During DVD play, the TV volume may be at a lower level than during TV broadcasts, etc. If this is the case, adjust the
volume to the desired level.
n
If the DVD/VCD/CD player is connected to the TV through a video cassette recorder, the picture may not be played back
normally with some DVDs. If this is the case, do not connect the player via the VCR.
TV SET
L R
Connecting to a stereo TV set
Connecting to a monaural TV set
To video input connector (yellow)
To audio input connectors (red, white)
To video input connector (yellow)
To audio input connectors (red or white)
Video / audio cable
(not supplied))
Video / audio cable
(not supplied))
