- 31 -
TV TYPE:
The video standard of the DVD player output can
be selected from MULTI, NTSC or PAL.
If MULTI is selected, the output standard will be
either NTSC or PAL depending on the DVD being
played.
If PAL is selected, the video output will be
converted to PAL standard irrespective of disc
standard.
VIDEO OUTPUT:
The Video output of the DVD player can be selected
as S-VIDEO or RGB.
If S-VIDEO is selected, RGB output via scart will
be disabled, only CVBS will be active via scart. S-
VIDEO output will be active via MiniDIN connector.
After switching to S-VIDEO, TV should be switched
to S-VIDEO input with TV remote control. If S-
VIDEO is selected in order to disable RGB via scart
and user prefers to watch CVBS via scart, TV should
be switched to scart input with TV remote control.
If RGB is selected, S-VIDEO output will be
disabled. Scart output will be CVBS+RGB. This is the
factory setting of the DVD player.
AUDIO SETUP
Note: It is not possible to connect speakers directly
to this DVD player; an AV amplifier must be used.
DOWNMIX MODE:
This mode allows the DVD player analog audio
outputs to be matched to the features available on
the TV in use. Analog audio outputs can be selected
as
SURROUND: Surround sound output.
STEREO: Two channels stereo.
Use this option if you have a stereo TV or a stereo
HI-FI system.
V SURR: Virtual surround encoded output.
OFF: Downmix mode off. Multichannel analog audio
is available (For 6-channel players).
Do not use this option if your DVD player is not
connected to a multichannel TV or multichannel AV
receiver. It is particularly important not to enable
speakers, which are not present. Otherwise serious
sound quality problems may occur..
NOTE: If downmix mode is enabled, that is, one of
SURROUND, STEREO or V SURR options are
selected, SPEAKER page in setup menu will be
disabled since this page contains speaker settings
related with multi-channel audio out. If you disable
DOWNMIX mode, speaker page will be activated
again (Only for 6-channel players. Speaker setup
page exists only for six channel players).
DYNAMIC (Dynamic Range Compression ):
Boosts frequency response .This item can be
selected between OFF and FULL.
LPCM OUT:
This item can be selected as 96K or 48K.
LANGUAGE SETUP
OSD LANG:
You can select the default OSD language of the
player menus
AUDIO:
You can select the default audio language if
supported by the DVD disc.
DISC MENU:
You can select the DVDs disc menu language
among these languages. Disc menu appears in the
selected language, if supported by the DVD disc.
SUBTITLE:
You can select the default subtitle language if
supported by the DVD disc.