background image

7

Electrical information

05

This alarm clock radio is fitted with a BS1363/A 13 amp plug. If it is not suitable for your supply sockets it must be removed and 
replaced with an appropriate plug. If the plug becomes damaged and/or needs to be replaced please follow the wiring instructions 
below. The plug removed must be disposed of immediately. It must not be plugged into a supply socket as this will be an electrical 
hazard. If the fuse needs to be replaced it must be of the same rating and ASTA approved to BS1362. If the plug is changed, a fuse 
of the appropriate rating must be fitted in the plug, adapter or at the distribution board. If the fuse in a moulded plug is replaced, the 
fuse cover must be refitted before the appliance can be used.

Wiring Instructions

The supply cable will be either 2-core or 3-core. Follow the appropriate wiring instructions given below. In both cases ensure that 
the outer sheath of the cable is firmly held by the cable clamp.

 

 WARNING

: Do not connect either wire  

to the earth terminal.

2- Core plug

 

 

 

 

 

 

     This symbol indicates that this 2-core appliance is  

Class II and does not require an earth connection.

The wire coloured blue must be connected to the terminal 
marked with the letter N or coloured black.
The wire coloured brown must be connected to the terminal 
marked with the letter L or coloured red.

Fuse

Brown (Live)

Blue 
(Neutral)

Green & yellow  
(Earth)

Fuse

Brown (Live)

Blue 
(Neutral)

3- Core plug

 

 

 

 

The wire coloured green and yellow must be connected to the 
terminal marked with the letter E, or by the earth symbol 

or coloured green or green and yellow.
The wire coloured blue must be connected to the terminal 
marked with the letter N or coloured black.
The wire coloured brown must be connected to the terminal 

 

 WARNING

: This appliance must be earthed.

Specifications

• Input voltage
• Power consumption
• Battery back-up
• MW frequency range
• FM requency range
• Dimensions

AC 240V ~50/60Hz
3.5W
1 x 9V (PP3)
522 - 1620 KHz
87.5 - 108 MHz
120mm (W) x 110mm (H) x 165mm (D)

GCR312BLK-Rev1-020908.indd   7

03/09/2008   10:59:42

Содержание GCR312BLK









Отзывы: