IPod OPERATION
P. 21
This unit allows for I-pod devices to be connected and controlled by the buttons on the front panel.
The I-pod track information can also be viewed on the LCD of this unit.
iPod Compatibility Chart
This unit supports the following I-pod devices:
iPod 1G
Not Supported
iPod 2G
Not Supported
iPod 3G
Firmware Version 2.2
iPod Mini
All versions
iPod 4G
All versions
iPod Photo
All versions
iPod Nano
All versions
iPod 5G(Video)
All versions
Connecting an iPod to this unit
NOTE
This unit is NOT ABLE to play video files. Any video files contained in a connected I-pod would be
ignored by this unit.
Turning iPod Power On and Off
IMPORTANT NOTE
Remember to disconnect the I-pod from this unit when not in use. Never leave your I-pod
inside the vehicle when unattended.The iPod power turns on automatically as soon as it is
connected to the 30 Pin Connector and as long as the vehicle's ignition is turned ON. The iPod
power can be turned OFF by removing the iPod from the 30 Pin Connector or if the vehicle's ignition
is turned OFF. Under this condition the iPod will go into pause mode
initially and then
into sleep
mode about 2 minutes later.
While the iPod is connected, the power cannot be turned on or off from the iPod itself.
“ ” to disconnect will be shown in the iPod's display while it is connected to the unit .
Tips
iPod Battery Charging
While connected to the unit, the iPod will automatically start re-charging as long as the vehicle's
ignition key is turn to ACC or ON.
Switch to iPod Mode
When the Head unit is powered on and the iPod is connected to the 30 pin connector,
press the mode button to change to iPod mode. The unit will display for a
while followed by .
When the files from the I-pod have been read, playback will begin
automatically. Use the Mode button to stop playback from the I-pod and switch to CD or Tuner mode.
OK to disconnect
iPod
photo
iPod
iPod
mini
iPod
nano
HEAD UNIT
8 Din iPod Ready Cable
iPod Cable
