ISO PLUG CONNECTIONS
Block A:
This plug is used for power supply connections only.
Block B:
This plug is used for connecting the loudspeakers.
• If your vehicle is not fitted with an ISO connector but just bare wire, then
simply connect the supplied ISO plug to bare wire connector A and B to the
radio’s ISO socket and connect the bare wire ends to the vehicles loudspeakers
according to the wiring codes as shown below. Make sure all connections
and any unused wires are insulated to prevent shorting.
• ISO Connector pin A6 (Car Light Illumination) is not used on this player.
ISO-PLUG A
ISO-PLUG B
Yellow
Yellow with black stripe
White
White with black stripe
Grey
Grey with black stripe
Brown
Brown with black stripe
A4
A5
A7
A8
A6
Orange
Orange/White
Red
Black
---
+12 Volt memory
+ 12 Volt Auto. Antenna
+12 Volt Power
Earth (Ground)
Car light (Illumination)
ISO - Plug
1
3
5
7
2
4
6
8
1
3
5
7
2
4
6
8
B
A
ISO
Function
Colour
B1
Speaker right rear
+
B2
Speaker right rear
–
B3
Speaker right front +
B4
Speaker right front –
B5
Speaker left front
+
B6
Speaker left front
–
B7
Speaker left rear
+
B8
Speaker left rear
–
ISO
Function
Colour
P. 11
Goodmans Product Information Helpline (0870) 873 0080
A8
A4
A7
A5
B1
B2
B3
B4
B5
B6
B7
B8
CARRADIO
ISO - PLUG
AERIAL SOCKET
Filter
Box
