13. INTRO SCAN AND PROGRAMMED TRACK PLAY
(Continued)
Play the first 10 seconds of each track on the disc.
In the STOP mode press the P MODE button three times and then press the PLAY/PAUSE button to
start INTRO playback.
During disc playback press the P MODE button three times and then press the forward skip
button
to start INTRO playback. Alternatively INTRO will start at the end of the current playing
track.
This allows selected tracks on the disc to be played in any desired order.
Programmes can be set in the STOP mode or
normal play mode.
1. Press the PROGRAMME button when the unit
is in the stop mode or normal play mode.
2. Press
or
to select the desired track.
3. Press the PROGRAMME button to enter the
track into the memory.
4. Repeat steps 2 and 3 to programme up to 20
tracks into memory.
5. Press
to start the programmed play.
6. To erase the programme, press the STOP
button twice.
INTRO
PROGRAMME
To set the programme play
PROGRAM
x 1
x 3
P MODE
INTRO
PROG
PROG
PROG
PROG
This player incorporates the latest electronic digital anti shock circuit, which prevents interruption of
the sound output when the unit is subjected to shock or vibration during disc playback. If in use the
player is likely to be subjected to shock or vibration (i.e. while walking or if used in a vehicle) press
the ASP button to provide uninterrupted playback.
Once the unit enters into the play mode the display will show "
" and the ANTI SHOCK
protection function is initialized, when "
" shows in the display the data buffer is full.
The sound will mute for approximately 1 second while the buffer fills, once filled the buffer will give
protection against interruption of sound output, if the player is subjected to excessive shock, some
interruption of sound output will occur, this is normal and to be expected, the sound will resume
once the player has stabilized from the shock.
To turn this function off , press the ASP button.
1. When using the ANTI SHOCK protection function the battery power consumption increases
because the disc rotates faster than normal and the dynamic memory is active. If used in stable
situation, press ASP button to turn off this function.
2. Whilst the ANTI SHOCK protection function provides for continuous sound output when the unit
is subjected to shock or vibration. It will not correct errors arising from the use of defective
scratched or dirty discs.
3. When powering the player solely from batteries, only use the ANTI SHOCK protection function
where necessary to preserve their life.
Notes:
14. DIGITAL ANTI SHOCK OPERATION
