This allows selected tracks on the disc to be played in any desired order. (Up to 24 tracks
can be programmed.)
A programme can be set in the STOP mode or in normal play mode.
PROGRAMME
To set the programmed play
12. PROGRAMMED TRACK PLAY
Press the PROGRAM button during play or in stop mode,
the display shows "
" and "
" flashing.
Press the BACK or Forward SKIP/TUNING button to select
the first track to be programmed.
Press the PROGRAM button. The first track number is now
stored into memory. And the Display changes to "
"
waiting for the next selection.
Repeat steps 2 and 3 to programme additional tracks.
Note: The programme can be reviewed by pressing the
SKIP/TUNING buttons and can be altered by
repeating steps 2 and 3.
After programming is finished, press the PLAY/PAUSE
button.
"
" will stop flashing in the display and
programmed play begins from the first programmed
track.
The player stops automatically after all programmed
tracks have been played. And the programme is
erased. To cancel programme playback, press the
STOP button, the programme will be instantly erased.
PROG
PROG
0 I
02
=
=
13. RADIO OPERATION
PRESETTING STATIONS
UP TO 5 MW AND 5 FM STATIONS CAN BE STORED INTO THE PRESET
LOCATIONS 1 TO 5 . (THEY WILL REMAIN IN MEMORY AS LONG AS THE
BATTERIES ARE INSTALLED, OR AN AC ADAPTOR (NOT SUPPLIED) IS
CONNECTED TO THE PLAYER)
NOTE:
Ê
Ë
Ì
Í
Slide the CD/RADIO function switch to the RADIO position.
Press the BAND button to select MW or FM Band, press the
or - buttons to select the desired station.
Press the STORE button "
" will flash in the display .
Whilst "
" is flashing in the display , press the PRESET UP/DN buttons to select a
memory location in which to store the station, then immediately press the STORE
button, "M" will stop flashing indicating the station has been successfully stored.
Steps 3 and 4 should be done quickly
.
.
RADIO OPERATION
Slide the CD/RADIO Function switch to RADIO position.
Press the Band button to select the desired wave band.
Tune to desired station by pressing the Tuning - or + button.
Each time the button is pressed, the frequency changes.
To search for a station quickly (automatic tuning), keep the
Tuning - or + button pressed until the frequency starts to
change rapidly. After tuning into a strong station, the search
stops.
If you tune into a FM stereo station, "FM" and "STEREO" will show in the Display.
Adjust the Volume control to your listening preference.
If you prefer more bass, slide the Bass Boost switch to ON position.
To turn off the radio, slide the CD/RADIO Function switch to CD position.
TO LISTEN TO PRESET MEMORY STATIONS (AFTER YOU PROGRAMMED THEM)
Slide the CD/RADIO Function switch to RADIO position.
Press the Band button to select the band you want (MW or FM).
Press the Preset UP/DN buttons to select the stored stations.
To switch off the radio, slide the CD/RADIO Function switch to CD position.
When the FM STEREO reception is noisy, press the STEREO/MONO button to switch
to MONO reception.
