Goodmans 6160, Руководство пользователя

Страница: 31 / 32

Troubleshooting
• If you are having a problem with your System, check this list for a possible solution before calling for service.
• If you cannot solve the problem from the hints given here, or the System has been physically damaged, call
the Goodmans product in-
formation helpline on 0870 873 0080.
Symptom Possible Cause Action
No sound is heard. • Connections are incorrect, or loose.
• Headphones are connected.
• Check all connections and make cor-
rections. (See pages 4 to 6.)
• Disconnect the headphones.
Poor radio reception • The a
erial
is disconnected.
• The M
W
Loop A
erial
is too close
to the System.
• The FM Wire
Aerial
is not prop-
erly extended and positioned.
• Reconnect the
aerial
securely.
• Change the position and direction of
the M
W
Loop
Aerial.
• Extend FM Wire
Aerial
to the best
reception position.
The disc tray does not open. • The AC power cord is not plugged in.
• Tray is locked. • Plug the AC power cord.
• Unlock the tray. (See page 1
3
.)
The CD skips. The CD is dirty or scratched. Clean or replace the CD. (See page 2
7
.)
The CD does not play. The CD is upside down. Put the CD in with the label side up.
The MP3 disc does not play. • No MP3 files are recorded on the disc.
• MP3 files do not have the file exten-
sion —.MP3, .Mp3, .mP3, or .mp3
in thier file names.
• MP3 files are not recorded in the for-
mat compliant with ISO 9660 Level
1 or Level 2.
Replace the disc.
The readout time of the MP3 disc is too
long. The readout time varies with the com-
plexity of the recording configuration. Do not use too many hierarchies and
folders when recording. Also, do not
record any other types of audio tracks
together with MP3 files. (See page
9
.)
The cassette holder cannot be opened. During tape playing, the power cord
was unplugged. Plug in the power cord, and turn on the
System.
Unable to record. Cassette record protect tabs are re-
moved. Cover holes on back edge of cassette
with tape.
Unable to operate the Remote Control. • The path between the Remote Con-
trol and the sensor on the Unit is
blocked.
• The batteries have
expired
.
• Remove the obstruction.
• Replace the batteries.
Operations are disabled. The built-in microprocessor has mal-
functioned due to external electrical in-
terference. Unplug the System then plug it back in.
MX-KB4(J).book Page 26 Tuesday, February 24, 2004 5:10 PM
28
Can not open CD tray until unlocked is shown in display.
•
CD door has been locked. Press Stop
n
and CD Open/Close
Take out the CD as shown below.
0
Can not open CD tray