Goodmans 4225MP3, Инструкция по эксплуатации

Страница: 8 / 17

- 7 -
BATTERY INSTALLATION
BATTERY REPLACEMENT
USING THE REMOTE CONTROLLER CORRECTLY
Insert 2 AAA size batteries into the battery compartment of the remote controller and replace the cover
observing polarity markings.
When the batteries become exhausted, the operating distance of the remote controller is greatly
reduced and you will need to replace the batteries.
Notes: To maintain the accuracy and long life of the transmitter, do not press two or more Buttons
simultaneously.
If the remote control is not to be used for a long time, remove the batteries to prevent possible
damage through leaking batteries.
Do not mix different types of batteries, or old batteries with new ones.
Point the remote controller at the Remote Sensor.
The functions of the Buttons on the remote control are the same as the corresponding controls on the
main unit.
When there is a strong ambient light source, the performance of the infrared Remote Sensor may be
degraded, causing unreliable operation.
The maximum effective distance for remote control operation is about 5 metres (16.5 feet).
SPEAKER CONNECTION
SPEAKER CONNECTION TERMINALS
Connect the left and right speaker cables to the left and right speaker terminals on the back of the unit.
When connecting match the colour of the cable (red or black) to the same coloured terminal to ensure
that the correct polarities are observed.
1. Press and hold down the speaker terminal tab.
2. Insert the speaker wire.
3. Release the tab.
NOTE: Make sure that the power is switched off when connecting or disconnecting the speakers.
PREPARATION FOR USE