336723
3.4
Adjusting the volume
Quick Setup
3
Press the /- buttons on the unit or remote
control.
3.5
Mute Function
1.
Press the MUTE button at any time to silence the
output.
2.
Press again to resume audio output.
3.6
X-BASS
You can also boost the bass effect of the audio
playback. pressing the X-BASS button will toggle the
X-BASS effect ON or OFF.
3.7
EQ Operation
1.
You can enjoy different EQ sound effect modes.
2.
Press the EQ button to change between different sound effects:
FLAT / ROCK / CLASSIC / POP / JAZZ
3.8
Source Modes
Press the SOURCE button on the main unit or remote control to switch
between the available modes: FM / CD / BT / LINE-IN
3.9
Setting the Clock
1.
Ensure the unit is in STANDBY mode by pressing the STANDBY button.
If you see only ‘0:00’ then you are in the correct mode. NOTE: If the
time has been set previously the display will not show ‘0:00’ but the
time from the original setting.
2.
Press and hold the CLK SET button (5), or (33) on the remote to enter
the clock setting menu.
3.
Set the hour digits by pressing either of the
/
buttons (12/13,
25/34). Once the hour has been set press the CLK SET button again to
move onto the minute setting. Use the same process to set the minutes.
4.
When set press the CLK SET button once more to store the setting.
NOTE: the clock is set in 24hr mode only.
