3. Assembly
The Action Camera must have either the waterproof case or
camera shield fitted to be able to attach it to the attachment buckle.
3.1
Camera Shield
The Action Camera comes with a camera shield for
added durability.
Insert the Waterproof Camera into the camera shield, with the lens
facing forwards.
The Power/Mode and Shutter/Select buttons should be positioned
at the top and the mounting point on the camera shield should be at
the bottom.
3.2
Waterproof Case
The Action Camera comes with a waterproof case for
underwater action and added durability.
1. Open the latch on the side of the waterproof case by simultaneously
pushing the arrow at the centre of the latch to the right and the arrow
at the bottom of the latch upwards.
2. Insert the Action Camera into the waterproof case, with
the lens facing forwards. The Power/Mode and Shutter/Select buttons
should be positioned at the top.
3. Close the waterproof case door and secure the latch.
NOTE: CHECK THAT THE LATCH IS SECURE AND THAT
ALL SEALS ARE IN POSITION. THE WATERPROOF ACTION
CAMERA SETTINGS CANNOT BE ADJUSTED WHILST IT IS
IN THE WATERPROOF CASE.
3.3
Handlebar Mount
1. Slide the attachment buckle into the slot on top of the handlebar mount.
2. Use the included screw to secure the handlebar mount and then
tighten, until it is secure.
3. Align the bolt on the attachment buckle to the Waterproof Action
camera’s mounting point and turn. When the desired position is
reached, use the wheel on the bottom end of the bolt to tighten.
4. Pinch both sides of the attachment buckle and slide it onto
the handlebar mount.
NOTE: USE THE INCLUDED RUBBER SWATCH TO MOUNT
IT SECURELY.
3.4
Helmet Mount
1. Align the bolt on the attachment buckle to the Waterproof Action
Camera’s mounting point and turn. When the desired position is
reached, use the wheel on the bottom end of the bolt to tighten.
FULL HD ACTION CAMERA
