Test Operation
On the thermostat, slide the Mode Switch
to
HEAT
. Press the COOLER or WARMER
button until the set temperature is 10 degrees
above room temperature. The HVAC unit
should energize in the heating mode
(Page 6).
Note: You may need to wait up to
five minutes for heating to energize due to the
compressor lockout feature.
On the thermostat, slide the Mode Switch
to
COOL
. Press the COOLER or WARMER
buttons until the set temperature is 10
degrees below room temperature. The
HVAC unit should energize in the cooling
mode (Page 6).
Note: You may need to wait
up to five minutes for cooling to energize due
to the compressor lockout feature.
Turn on the power to the Heating/Air
Conditioning system.
On the thermostat, slide the Mode Switch to
OFF
. Slide the Fan Switch to
Fan On.
The
fan should turn on and run continuously
(Page 6).
OWNER'S MANUAL
Page 22
TSTATG1100-2
