Goodman AVXC2000241, Сервисный бюллетень

Страница: 11 / 16

Device Layout
A. Power Switch – Can be placed in the ON or OFF posi-
tion. The device must be powered on to
program Shared Data from the CoolCloud HVAC app and
to load Shared Data onto any
compatible equipment.
B. Status LED – Will blink periodically when the device is
powered on. The Status LED will blink
once every 4 seconds when the device is powered on nor-
mally. The Status LED will blink 3 times
in quick succession to indicate the battery is low and will
need to be replaced soon.
C. Shared Data Loading Connector
D. Battery/Battery Slot – Accepts a CR2032 3V coin cell
battery
Setup
Before using the card, download the
CoolCloud
HVAC app
for iOS or Android using the links below. Be
sure to register for an account before continuing.
Connecting to the Device
Turn the Bluetooth ® Shared Data Loader on by switching
the Power Switch to the ON position. The blue Status LED
should begin flashing periodically. If the CoolCloud HVAC
app is open, it will detect the new Bluetooth network and
display “SharedDataCard” as an available network. Tap on
this network to connect.
If the network does not appear, ensure the Status LED on
the device is flashing and tap the refresh button in the app
to continue scanning for networks.