High-Speed USB 2.0 Docking Station
Connecting the Docking Station
After installing the software, proceed as follows to connect the device
：
1. Plug the square end (Type B male receptacle) of the USB cable into the USB
upstream connector located on the side of docking station.
2. Plug the flat end (Type A male receptacle) of the USB cable into a free USB port on
your computer.
3. (Optional) Plug the power adapter to a household AC outlet and plug the adapter’s DC
jack into the DC socket on the side of docking station.
* The docking station supports both self-power mode and bus-power mode. Refer to the
“Self-Power Mode vs Bus-Power Mode” section for details.
Power DC Jack
USB Type B Female Port
Audio In
Audio Out
USB Type A Female Port
RJ-45
Ethernet Port
DB-9 Serial Port
9
