Good Times 8451291, Как собрать

Страница: 4 / 10

Step 3: Set your heights and join Base Frames
CONNECTING SUPPORTS TO FRAMES:
• Lower height ranges using only the 50mm or 100mm foot have a knock in tube end
which goes directly into the base frame’s pre-drilled holes. Unscrew the tube end,
then using a hammer, knock it into the underside of the base frame module ensuring
only one is inserted at an intersection (see page 4). Once this is done, reattach the
foot – you can use the key head at the top of the foot to adjust the height by using
a cordless drill through the hole in the top of the frame.
• All other height ranges require a 2 piece support, including a steel component and
150mm foot. Screw the 150mm foot into the base of the steel support. Place the top
of the steel support into the internal corner of the base frame module and attach using
the fixings purchased (see Step 2 – Select your fixings), remember to pre-drill a shallow
4mm hole in the timber. Ensure only one support is attached at an intersection.
SELECT YOUR SUPPORT
COMPONENTS FROM
THE FOLLOWING TABLES
Steel Support Support Feet
Base Frame Kit - 70x45mm (Domestic)
Height Range Steel Support Support Feet
110mm - 150mm NO 50mm
Note: Lock nut to be removed from adjustable foot to achieve the minimum heights above
Base Frame Kit - 140x35mm (Domestic and Commercial)
Height Range Steel Support Support Feet
180mm - 260mm NO 100mm
250mm - 415mm 140mm 150mm
380mm - 545mm 270mm 150mm
510mm - 675mm 400mm 150mm
640mm - 805mm 530mm 150mm
Note: Lock nut to be removed from adjustable foot to achieve the minimum heights above
Base Frame Kit - 90x45mm (Domestic)
Height Range Steel Support Support Feet
130mm - 220mm NO 100mm
200mm - 365mm 140mm 150mm
330mm - 495mm 270mm 150mm
460mm - 625mm 400mm 150mm
590mm - 755mm 530mm 150mm
Note: Lock nut to be removed from adjustable foot to achieve the minimum heights above
3