Method of Usage
Method of Usage
VI
.
Instructions for installation of lower leg
1
.After connecting the lower leg and the air tube on the massage chair with the wire
harness, untie the fixed pipeline belt and insert the connecting part into the seat
frame (Fig. 1).
2
.Sleeve the lower leg fixing block on the round tubes on the left and right sides of
the lower leg (Fig. 2).
3
.Hang the lower leg sleeved with the fixing block on the hook of the massage chair
seat frame (Fig. 3).
4
.Fasten the lower leg on the massage chair with 4 M4 screws (2 on the left and 2
on the right). Check whether there is any abnormality in the up-and-down turning
and whether the pipeline is folded. Then the lower leg installation is completed
(Fig. 4).
1
3
2
4
33
32
VII
. Instructions for Removal and Use of Head Cushion and Backrest
·
The use of the head cushion can reduce the intensity of kneading massage on the
neck and shoulders. You can decide whether to use the head cushion according
to your own needs (the head cushion is recommended). The backrest and the
back cushion are connected by a zipper (1). The head cushion and the backrest
are connected by a
(2).
Zipper
VIII. Floor Protection
·
The prolonged heavy pressure on the massage chair may cause scratches on the
floor. Thus, put a carpet or cushion on the floor where the massage chair is placed
to avoid this damage.
Note: Do not move the massage chair with its wheels on the rough ground or in a
narrow space. At least two persons are required to lift it. During lifting, take the
legrest sealing plate and backrest cover grooves as the acting points. (Do not lift the
armrest directly.)
Zipper
1
2
Zipper
