FCC STATEMENT:
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that the interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures: 1) Reorient or relocate the receiving antenna. 2) Increase the separation between the equipment and receiver. 3) Connect the equipment into an outlet on a circuit different from that of the receiver. 4) Consult the dealer or an
experienced radio/TV technician for help.
Hardware Kit:
ZH-UC1304F00-WH1
ZD-UC1304LF12-FST,
ZD-UC1304LF18-FST,
REPLACEMENT
PARTS LIST
Need Help?
Please visit our website at:
https://goodearthlighting.com/contact-us
or call the Customer Care
Center
1-800-291-8838
, 8:30 a.m.-5 p.m., CST, Monday-Friday.
PROBLEM
POSSIBLE CAUSE
CORRECTIVE ACTION
1. Light does not come on.
1. Power/ light switch is off.
2. Fixture not properly wired to junction box.
3. Bad switch.
1. Discontinue use.
1. Call customer service
(1-800-291-8838).
1. Verify power supply and light switch are on.
2. Check wiring connections.
3. Test or replace switch.
Before doing any work on the fixture, shut off power supply at the circuit breaker panel to avoid electrical shock.
2. Fuse blows or circuit breaker trips when
light is turned on.
FCC responsible party name :
Good Earth Lighting, Inc.
Address:
1400 E Business Center Drive, STE 108, Mount Prospect IL 60056, USA
Telephone number:
1-800-291-8838
Good Earth Lighting
®
1400 East Business Center Drive, Ste. 108 Mount Prospect, IL 60056
Good Earth Lighting
®
is a registered trademark of Good Earth Lighting, Inc.
© 2021 Good Earth Lighting, Inc.
TROUBLESHOOTING GUIDE
ZD-UC1304LF24-FST,
ZD-UC1304LF30-FST
Replacement
Diffuser Model:
Good Earth Lighting
®
- 6 YEAR LIMITED WARRANTY:
The manufacturer warrants this lighting fixture to be free from defects in materials and workmanship for a period of (6)
years from the date of original purchase by the consumer. The fixture is not warrantied for use in a commercial or retail application. The warranty is limited to use in a residential
environment. We will repair or replace (at our option) the unit in the original color and style if available, or in a similar color and style if the original item has been discontinued, without
charge. Defective units must be properly packed and returned to the manufacturer with a letter of explanation and your original purchase receipt showing date of purchase. Call
1-800-291-8838
to obtain a return authorization number and an address where to ship your defective product.
Note:
C.O.D. shipments will
NOT
be accepted. The liability of the
manufacturer is in any case limited to replacement of the defective light fixture product. The manufacturer will not be liable for any other loss, damage, labor costs or injury which is
caused by the product. This limitation upon the liability of the manufacturer includes any loss, damage, labor costs or injury which is (I) to person or property or otherwise; (II) incidental
or consequential in nature; (III) based upon theories of warranty, contract, negligence, strict liability, tort, or otherwise; or (IV) directly, or indirectly related to the sale, use, or repair of the
product. This warranty gives you specific rights, and you may also have other rights which vary from state to state.
CARE AND MAINTENANCE:
Periodically clean the fixture and diffuser using a mild, non-abrasive cleaner and soft cloth. When cleaning the fixture, make sure the power is turned off.
Do not spray cleaner directly onto any part of the fixture or LEDs.
OPTIONAL: INSTALLING ADDITIONAL LIGHTS
Option 2:
Keyhole Mount: Locate the mounting keyhole slots on
the back of the fixture to measure the distance and mark
locations to install the 2 screws
(AA)
. Carefully drive screws in,
leaving a little over a 1/16 in. gap. Slide the fixture's 2 keyhole
slots over the 2 screw heads until both sides are captured by
the narrow ends of the keyhole slots.
Once installation is complete, plug each additional fixture into the
fixture ahead of it. A total of 360 W maximum.
(10 fixtures total)
AAx2
5B
OPTION 2
5B
1/16 in.
Press the “-” to turn on.
ON/OFF ROCKER SWITCH
AAx2
5A
OPTION 1
5A
Option 1
: Pre-installed Captive Screws: Remove the plastic
screw covers from both ends by prying off them with a flathead
screwdriver. The fixture has pre-installed captive screws at each
end. Hold the fixture in the desired location and drive wood
screws until they secure the fixture to the bottom surface of the
cabinet. The wood screws must be driven in straight for the
fixture to mount properly.
DO NOT OVERTIGHTEN
to prevent
stripping the screw hole. Replace screw covers on both ends.
Press the “- ” to turn on.
ON/OFF ROCKER SWITCH
2
Printed in China
