User manual
Zoom 140 LED work light
66515
REV2018-11-26
V1.0
Subject to change without notice.
Goobay
®
by Wentronic GmbH | Pillmannstraße 12
38112 Braunschweig | Germany
- 2 -
Specifications
Operating voltage (V
)
4.5
Light sources
LED
Quantity (pcs.)
1
Power (W)
Equivalent to bulb (W)
3
15
Energy efficiency class
A
Light colour
Rated luminous flux (lm)
Colour temperature (K)
cool white
140
6500
Colour randering index (Ra)
> 70
Beam angle (°)
120
Max. light range (m)
70
Nominal lifetime (h)
50000
Number of switching cycles
100000
Protection level / Protection class
IPX4 / III
Operating temperature range (°C)
-10 ~ +50
Housing material
aluminium
Housing colour
black
Bending radius luminaire neck (°)
360
Dimensions (Ø x l) [mm]
30 x 515
Weight (g)
240
Batteries (not included in the scope of delivery)
Type
LR 03 AAA | Micro | 1.5 V
Quantity (pcs.)
3
Min. operation time (h)
2
1 Safety Instructions
1.1 General
• Read the user manual completely and carefully before use.
The user manual is part of the product and contains important information
for correct use.
• Keep this user manual.
The user manual must be available for uncertainties and passing the product.
• Do not modify product and accessories.
• Do not short connectors and circuits.
• Use product, product parts and accessories only in perfect condition.
• In case of questions, defects, mechanical damage, trouble and other
problems, non-recoverable by the documentation, contact your dealer
or
producer.
Target group information
Not recommended for children and people with physical and / or mentally
limited
capabilities.
• Secure packaging, small parts and insulation against accidental use.
• Never look directly into the light source.
• Do not aim the beam of the light into the eyes of other persons, animals
or reflective surfaces.
The eyes can be damaged!
• Avoid stresses such as heat and cold, moisture and direct sunlight,
vibration and mechanical pressure.
The product contains magnetic materials.
• Regarding the compatibility with implanted medical devices, consult a
doctor before use.
• Keep a minimum distance of 20 cm to medical equipment.
• Do not store or operate near bank cards.
1.2 Batteries
•
Do not mix old and new batteries.
•
Only use batteries of the same or equivalent type as recommended.
•
Do not mix alkaline, carbon zinc or nickel cadmium batteries
.
•
Remove leaked, deformed or corroded batteries from the product and
dispose them by appropriate protectives.
•
Do not throw into fire.
2 Description and Function
2.1 Product
Battery-powered LED work light as ideal lighting solution for work, leisure and
breakdown assistance.
•
magnet on the bottom and bendable neck for flexible attachment of
the
work
light
•
lamp head with slide mechanism for continuously adjusting the light
beam
•
corrosion-resistant
2.2 Scope of delivery
Zoom 140 LED work light , user manual
2.3 Operating elements and product parts
1 Magnet 2 Lens 3 Lamp head
4 lamp neck
5 ON/OFF push button
6 Handle with integrated battery compartment 7 battery compartment lid
8 Battery magazine
3 Intended Use
We do not permit using the device in other ways like described in
chapter „Description and Function“ or „Safety Instructions“.
Not attending to these regulations and safety instructions might cause
fatal accidents, injuries, and damages to persons and property.
IPX4
This product is protected against splash water.
4 Commissioning
NOTE! Risk of damage due to incorrect power supply
•
Only use batteries of the same type listed in chapter „Specifications“.
1. Check the scope of delivery for completeness and integrity.
2. Unscrew the battery cover (7) counterclockwise from the handle (6).
3. Remove the battery magazine (8).
4. Insert 3 new batteries into the battery magazine, observing the pola-
rity of plus and minus. See Fig. 2a.
5. Push the filled battery magazine back into the handle in the direction
indicated by the arrow on the magazine. See Fig. 2b.
6. Screw the battery compartment cover clockwise again.
See
Fig.
2b.
The LED work lamp is now ready for operation.
5 Operating
5.1
Switching ON and OFF
1.
Switching ON:
Press the ON / OFF push button (5) 1x vigorously
until
an
audible
click
tone
sounds.
2.
Switching OFF:
Press the ON / OFF push button once again one
time
until you hear another audible click.
5.2
Adjusting Focus
• Adjust the focus countinuously by sliding or pulling the lamphead (3).
Slide forward: narrow beam and long light range
Pull back: wide beam of light
5.3
Handle with magnet
There is a magnet (1) at the end of the handle (6).
•
If necessary, attach the LED work light with the handle to a ferrous
base.
6 Maintenance, Care, Storage and Transport
The products are maintenance-free.
•
Only use a dry and soft cloth for cleaning.
• Do not use detergents or chemicals.
•
Store cool and dry.
• Remove batteries / rechargeable batteries when not in use.
•
Store the product out the reach of children and in a dry and dust-pro-
tec-ted ambience when not in use.
• Keep and use the original packaging for transport.
7 Disposal Instructions
According to the European WEEE directive, electrical and electronic
equipment must not be disposed with consumers waste. Its components
must be recycled or disposed apart from each other. Otherwise contami-
native and hazardous substances can damage the health and pollute the
environment.
As a consumer, you are committed by law to dispose electrical and elect-
ronic devices to the producer, the dealer, or public collecting points at the
end of the devices lifetime for free. Particulars are regulated in national
right. The symbol on the product, in the user manual or at the packaging
alludes to these terms.
With this kind of waste separation, application and waste disposal of
used devices you achieve an important share to environmental protection.
WEEE No: 82898622
