User Manual
22
23
1.
Before drilling, attend to live
cables
or
other
lines
lying
behind
plaster,
and
do
not
damage
them.
2.
Use a spirit level to mark the
drill
holes
on
the
wall.
3.
Mark the drill holes 1 to 6 with
a pencil.
Fig. 11:
Aligning and marking
Use the wall plate (A) as template.
4.
Drill the drill holes with a
10mm
concrete
drill
60mm
deep.
Fig. 12:
Drilling drill holes
5.
Plug a concrete anchor (W-B)
in
each
drilling
hole.
6.
Attach the TV wall bracket (A)
with the wall screws (W-A) and
washers (W-C) in a way, that
the
arrow
is
pointing
up.
Fig. 13:
Wall mounting
4.3
Mounting the flat screen
Warning level
Safety instruction
Bid / Ban
Risk of injury by tripping and falling
>> Place, transport and install product, parts
and acceories in a safe way.
Risk of material damage by improper
procedure
>> Only use moderate force when tightening
the screws in order to avoid damaging
threads.
>>
>>
NEVER set the screen on the front during
installation!
Do not damage the flat screen by too
long screws.
Tab. 18:
Mounting the flat screen
4.3.1
Flat screens with flat back
1.
Lean the flat screen vertically
on a soft, large surface or a
wall and protect it of scratches
and
overturning.
Fig. 14:
Flat screens with flat back
1
2.
Attach the adapter brackets
(B) with washers (M-G) and
screws, fitting to your flat
screen to the flat screens
back.
Fig. 15:
Flat screens with flat back
2
Align parts with arrow pointing up.
4.3.2 Flat screens with arched back
1.
Lean the flat screen vertically
on a soft, large surface or a
wall and protect it of scratches
and
overturning.
Fig. 16:
Flat screens with arched back 1
2.
Attach the adapter brackets
(B)
with
washers
(M-F),
Zi
Z
i
Z
i
M-E
M-F
M-H
M-E
M-F
M-G
M-E
M-F
M-G
=
L
=
=
L
=
M-H
M-H
=
L
=
=
L
=
M-C
M-D
M-C
M-D
M-C
M-D
M-F
M-G
M-F
M-H
M-F
M-H
M-G
M-G
screws and TV spacers to the
flat screen.
Align parts with arrow pointing up.
Fig. 17:
Flat screens with arched back 2
63486+63487_V5.indd 22-23
28.05.2018 15:37:06