16
1 m
2 m
3 m
4 m
1 m2 m 3 m4 m 5 m6 m 7 m
H (m)
R (m)
Fig. 5:
Installation - Reach
6 Operation
The range can not be adjusted.
It can be varied due to the mounting height.
The switch-off delay can not be set.
The trigger sensitivity can not be adjusted.
The multifunction switch can switch 3 modes.
• Press the multifunction switch once each time to switch to the next
mode.
A
B
C
(D)
Fig. 6:
Operation - Function modes
Models 45801-45803:
Mode A:
100 %
20 %
A
10 s
20 %
The front and rear lights illuminate at full
power after a movement in the detection
area and change to approximately 20 %
power after approximately 10 seconds
without movement until a new movement
detection.
20 %
A
5 h
20 %
Front and rear light automatically switch
on at 20 % of the maximum power for about
5 hours at dusk or an ambient brightness
of ≤30 lx without motion detection, then
down
again.