7
Subject to change without notice.
2 Description and Function
2.1 11 in 1 USB-C™ Multidock with Wireless Charging and Power
Delivery
(100W)
The UBC-C™ Multidock extends a USB-C™ port with 3 USB-A 3.0 ports, a SD card reader, a
microSD card reader, a 4k HDMI™ port, a VGA port, a network port, a 3.5 mm jack and a wireless
charger for smartphones.
2.2 Operating elements and product parts
1
3.5 mm stereo headphone jack
2
USB-C™-charging jack
3
MicroSD jack
4
SD jack
5
3x USB 3.0 jack (Typ A)
6
RJ45 jack (8P8C)
7
HDMI™ jack (Typ A)
8
VGA jack HD (15-polig)
9
USB-C™ plug
2.3 Scope of delivery
11 in 1 USB-C™-Multidock with Wireless Charging und Power Delivery (100W), user manual
3 Intended Use
We do not permit using the device in other ways like described in chapter „Description and
Function“ or in the „Safety Instructions“. Use the product only in dry interior rooms. Not
attending to these regulations and safety instructions might cause fatal accidents, injuries,
and damages to persons and property.
IP20
This product is protected against medium sized foreign objects, but not against water ingress.
4 Preparation
•
Compare the specifications of all used devices to ensure compatibility.
•
Check the scope of delivery for completeness and integrity.
5 Connection
5.1 USB-C™ Multidock
•
Make sure that the USB-C™ port on your laptop/tablet is a fully functional USB 3.1 port that also
allows the laptop/tablet to be charged.
•
Place the USB C™ Multidock on a flat, horizontal surface.
•
Now connect a suitable USB-C™ charger to the USB-C™ port of the Multidock.
The battery of your laptop or tablet will charge.
5.2
Wireless Charging
Smartphones with wireless charging function (e.g. iPhone 8 or newer) can be charged with 5, 7.5 or
10 watts, depending on the model.
• Simply place the smartphone on the induction surface of the Multidock (as shown in Figure 3).
The charging process starts automatically and ends when the battery is fully charged.
Parallel to charging, all other Multidock functions can be used without restriction.
It is recommended to use a USBC™ charger with a minimum power of 60W.
