Goobay 31961, Руководство пользователя

Страница: 15 / 24

15
5 Replacing the Battery:
Inserting a Battery:
1. Open the battery case at the back of the device by sliding it on.
2. Connect a 9 V battery block to the internal battery clip and
place it into the case.
Batteries are not included.
3. Close the battery case.
Replacing a Battery:
1. Open the battery case at the back of the device by sliding it on.
2. Disconnect the 9 V battery block and remove it.
3. Insert a new battery and/or close the battery case.
6 Operating and Installing:
6.1 Testing installed cables:
1. Connect the first cable end to the remote unit, when you want
to test already installed cables.
2. Follow the instructions continuing to 6.2.2.
6.2Testing bulk cables:
1. Connect the first cable end to the main units REMOTE
connection, when you want to test bulk cables.
The order is unimportant at this.
2. Connect the second cable end to the main units MAIN
connection.
3. Switch on the HDMI
TM
line tester by using the ON/OFF switch.
The LEDs shine after each other = Function test of the
HDMI
TM
line tester. The Power LED shines.