MG7540 Cable Modem User Manual
6
Do not press the Reset button unless you want to clear the current settings. The
Reset button is in a small circular hole on the rear panel. If you want to restore the
default settings, please press the Reset button gently for 5 second with a fine needle
inserted into the hole and then release the button. The system reboots and returns to
the factory defaults.
3.2 Hardware
Installation
3.2.1
Connecting the Device
Please follow the steps below to connect the device.
Step1
Connect the
Cable
port of the CM/RG with HFC cable.
Step2
Connect the
Eth
port of the CM/RG to the network card of the PC via an
Ethernet cable.
Step3
Plug one end of the power adapter to the wall outlet and connect the
other end to the
Power
port of the CM/RG.
