GoBeam8000F Quick Installation Guide
UM000018 Rev 1.0
Copyright © 2014 GoNet Systems Ltd. All rights reserved.
7.
Regulatory Information
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
The Part 15 radio device operates on a non-interference basis with other devices
operating at this frequency when using its antennas.
Any changes or modifications not expressly approved by GoNet Systems could void the
user's authority to operate the equipment.
The antennas used for this transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
This equipment complies with the FCC RF radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with a
minimum distance of 20cm between the radiator and any part of any person.
The antennas used for this transmitter must be fixed mounted on indoor or outdoor
permanent structures with a separation distance indoor network device.
The antennas used have an N-Type connector in compliance with FCC 15.203 Antenna
Requirement.
This device must be installed according to the latest version of the country national
electrical codes. For North America, equipment must be installed in accordance to the
applicable requirements in the US National Electrical Code and the Canadian Electrical
Code.
