5
8.
EDID Management Rotary control:
MODE 0
Ultra HD(4K2K@60)
– 8/10/12bit 3D HDR video & 7.1ch audio
MODE 1
Ultra HD(4K2K@60)
– 8/10/12bit 3D HDR video & 2ch audio
MODE 2
Ultra HD(4K2K@30)(4K2K@60 420)
– 8/10/12bit 3D HDR video & 7.1ch audio
MODE 3
Ultra HD(4K2K@30)(4K2K@60 420)
– 8/10/12bit 3D HDR video & 2ch audio
MODE 4
Full-HD(1080p@60)
– 12bit 3D video & 7.1ch audio
MODE 5
Full HD(1080p@60)
– 8bit 2D video & 2ch audio
MODE 6
Learning EDID from loopout #1
MODE 7
Auto EDID analysis learning mode
9.
RS-232(terminal block format):
The order of RS-232 pin are TX, RX, GND (from the left side to the
right)
10.
IR Receiver:
Infrared 3.5mm socket for plugging in the extension cable of IR receiver
11.
IR Blaster:
Infrared 3.5mm socket for plugging in the extension cable of IR blaster
12.
HDMI IN:
Connect to a HDMI input source
13.
HDMI LOOPOUT #1:
Connect to a HDMI display with a HDMI male-male cable here
14.
HDMI LOOPOUT #2:
Connect to a HDMI display with a HDMI male-male cable here
15.
HDMI Signal OUT1-2:
Link to each HDMI display via a Cat-5/5e/6 cable with a HDMI over Cat.X
receiver.
6
IR PASS-THROUGH
IR Extenders
IR Blaster
IR Receiver
IR Sockets
IR BLASTER:
plug in the IR blaster to emit all IR command signals received from the IR receiver from the
other end to control the devices corresponding to the IR signals.
IR RECEIVER:
plug in the IR receiver to receive all IR command signals from the IR remote controls of
the corresponding devices.
Definition of IR Earphone Jack
IR Blaster
IR Receiver
You can buy any IR extension cables in the market that are compatible to the definition of
the IR sockets for the matrix if necessary for replacement use. However, IR cables longer
than 2m (6-ft) may not work.
Incorrect placement of IR Blaster and Receiver may result in the failure of the IR extenders. Please check
carefully before plugging in the IR extender to the respective IR sockets. Warranty will not cover the damage.
CAUTION!
