12
Instruction of Software Operation
Menu
File
a.
Device Linkage:
This will
synchronize the status or the
MX-2000A with the software,
especially after IR commands sent.
b.
Data Table:
It will show a dialog that
will list the input and resolution data.
c.
Factory Reset:
This will restore all
the system values back to the factory
default.
Connector
d.
Setting:
It will show a dialog, you
could modify serial port setting from
there.
e.
Monitor:
It will show a dialog that will
display the send and receive values.
Advance
f.
Firmware Update:
It will show a
dialog, that that for update the
firmware to the newest version.
g.
Resolution Parameter:
It will show a
dialog that for custom output
resolution.
