3
PANEL DESCRIPTIONS
Transmitting unit
►
EX-57AL-O-2K-TX
1.
Power LED:
Power indicator LED
2.
Link LED:
Link indicator LED
3.
Signal LED:
When user connect to the source, the indicator LED will light
4.
SFP OUT:
Plug in single/multi-mode fiber optic cables that needs to be linked to the receiving unit
EX-57AL-O-2K-RX
5.
+5V DC:
Connect to a 5V power supply unit
6.
HDMI IN:
Connect to a HDMI source with a HDMI male-male cable
7.
IR Blaster:
Infrared 3.5mm socket for plugging in the extension cable of IR blaster
8.
IR Receiver:
Infrared 3.5mm socket for plugging in the extension cable of IR receiver
9.
RS-232:
Connect to serial port device with a DSUB-9 male-male or male-female cable here
10.
Ethernet Port:
Ethernet control port
4
Receiving unit ► EX-57AL-O-2K-RX
1.
Power LED:
Power indicator LED
2.
Link LED:
Link indicator LED
3.
Signal LED:
When user connect to the display, the indicator LED will light
4.
EDID Button:
To learn EDID from display
5.
SFP IN:
Plug in single/multi-mode fiber optic cables that needs to be linked to the transmitting unit
EX-57AL-O-2K-TX
6.
+5V DC:
Connect to a 5V power supply unit
7.
HDMI OUT:
Connect to a HDMI display with a HDMI male-male cable
8.
IR Blaster:
Infrared 3.5mm socket for plugging in the extension cable of IR blaster
9.
IR Receiver:
Infrared 3.5mm socket for plugging in the extension cable of IR receiver
10.
RS-232:
Connect to serial port device with a DSUB-9 male-male or male-female cable here
11.
Ethernet Port:
Ethernet control port
