7
Method B: Software Control through RS-232 / Ethernet port
1. System Requirement
(1) OS information: MS Win XP/7/8/10
(2) Baud rates: 115200
(3) Software size: 10 MB
(4) Minimum RAM requirement: 256MB
2. Control interface
When clicking on the executable file, the following dialog will pop-up (under Microsoft
Windows 7, please run as administrator)
RS-232 serial Mode: Use RS-232 to connect the port on device and computer. Select correct
COM port and click the OK button.
Ethernet Mode: Enter the IP address of the device and click the OK button.
After the software control setting is accomplished, it will enter directly to control interface.
8
Control Interface
1. Connection Status:
Show the connect information and status. If users use RS-232 serial Mode to connect device,
the graph is . In contrast, the graph of Ethernet is . In addition, if users would link to
change the control method, uses can click on the button to change.
1
2
3
4
5
6
7
8