-
1-
INTRODUCTION
The
MT-503A HDMI and 3G/HD/SD-SDI Bi-directional scaler Converter with 3.5” LCD Monitor,
Audio Embedder/Extractor & local loopout
is an advanced HDMI and SDI cross-conversion monitor
with multi-format and multi-pattern support. Not only can it receive signals, the MT-503A can also
extend HDMI or SDI input signals through SDI loop-out. It is equipped three buttons and a 3.5” panel to
ease the control. With a 3.5” panel, the output signal can be monitored and controlled through OSD,
such as resolution and image adjustments. This device can also be used as a tool for eye diagram
scanning to check the quality of the SDI cable input. In addition, it provides a variety of test patterns,
which can be used as a simple pattern generator. The MT-503A provides a cost effective way to the
monitor video devices and displays.
FEATURES
Input Video support
[3G] 1080p @50/59.94/60Hz (4:4:4)
[HD] 720p @50/59.94/60Hz, 1080i @50/59.94/60Hz, 1080p @24/30Hz
[SD] NTSC @59.94Hz, PAL @50Hz
Input bandwidth 2.970Gbps
Output maximum pixel rate: 165MHz
Multiple VESA standards support for output video resolutions
Deinterlacing supported
Built-in test patterns
HDMI and SDI cross conversion :
Simultaneous conversion between SDI to HDMI when HDMI to SDI
Simultaneous conversion between SDI to SDI when HDMI to HDMI
HDMI to SDI and HDMI
SDI to SDI and HDMI
OSD control interface
Push button control
Supports eye diagram scanning
Supports audio level bars
Supports cable length indicator
Supports output test patterns
Supports audio embedding and extraction via stereo
Supports noise reduction and video enhancement features
Video H/V mirror supported
Active video area adjustment supported
USB firmware upgradable for expanded compatibility
-
2-
PACKAGE CONTENTS
1x MT-503A
1x DC 12V 2A
1x User Manual
