GoMax Electronics MA-5488V2 Скачать руководство пользователя страница 2

 

Safety and Notice 

The 

MA-5488V2 

8x8  HDBaseT  Lite  matrix  with PoC, HDCP2.2 & 4K2K60 (YUV420)

  has been 

tested for conformance to safety regulations and requirements, and has been certified for 

international use. However, like all electronic equipments, the 

MA-5488V2

 should be used with care. 

Please read and follow the safety instructions to protect yourself from possible injury and to minimize 

the risk of damage to the unit. 

● Follow all instructions and warnings marked on this unit. 
● Do not attempt to service this unit yourself, except where explained in this manual. 
● Provide proper ventilation and air circulation and do not use near water. 
● Keep objects that might damage the device and assure that the placement of this unit is on a 

stable surface. 

● Use only the power adapter and power cords and connection cables designed for this unit. 
● Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device 

before cleaning. 

 
 
 
 
 
 
 

TABLE OF CONTENTS 

INTRODUCTION................................................................................................................. 1

 

FEATURES ......................................................................................................................... 1

 

ACKAGE CONTENTS ........................................................................................................ 1

 

SPECIFICATIONS .............................................................................................................. 2

 

PANEL DESCRIPTIONS ..................................................................................................... 3

 

Transmitting unit ► MA-5488V2 .............................................................................. 3

 

Receiving unit

 

 CV-745V ...................................................................................... 4

 

IR PASS-THROUGH ........................................................................................................... 5

 

CONNECTION DIAGRAM .................................................................................................. 6

 

OPERATION APPROACH .................................................................................................. 7

 

EDID LEARNING .............................................................................................................. 19

 

FAQ .................................................................................................................................. 20

 

NOTICE ............................................................................................................................ 21

 

WARRANTY ..................................................................................................................... 22

 

 

 

Содержание MA-5488V2

























Отзывы: