3
PANEL DESCRIPTIONS
Transmitting unit
►
EX-56SZ-TX
Front Panel
1.
HDMI IN:
Connect to a HDMI source with a HDMI male-male cable
2.
IR Receiver:
Infrared 3.5mm socket for plugging in the extension cable of IR receiver
3.
IR Blaster:
Infrared 3.5mm socket for plugging in the extension cable of IR blaster
4.
+12V DC:
Connect to a 12V power supply unit
Rear Panel
5.
RS-232:
Connect to serial port device with a DSUB-9 male-male or male-female cable here
6.
Mini USB:
For technical support only [firmware update]
7.
Dip Switch
DIP
Switch
Position
Description
TX
&
RX
PIN#1
ON
[
]
For
system
firmware
update
OFF
[
]
Normal
PIN#2
ON
[
]
Reserved
OFF
[
]
RS
‐
232/IR
function
ON
PIN#3
ON
[
]
Disable
IR
function
OFF
[
]
Enable
IR
function
8.
LED indicator:
[Red]: Power LED indicator
[Green]: Link LED indicator
9.
SFP OUT:
Plug in single mode fiber optic cables that needs to be linked to the receiving unit
EX-56SZ-RX
4
Receiving unit
►
EX-56SZ-RX
Front Panel
10.
HDMI OUT:
Connect to a HDMI display with a HDMI male-male cable
11.
IR Receiver:
Infrared 3.5mm socket for plugging in the extension cable of IR receiver
12.
IR Blaster:
Infrared 3.5mm socket for plugging in the extension cable of IR blaster
13.
+12V DC:
Connect to a 12V power supply unit
Rear Panel
14.
RS-232:
Connect to serial port device with a DSUB-9 male-male or male-female cable here
15.
Mini-USB:
For technical support only [firmware update]
16.
Dip Switch
DIP
Switch
Position
Description
TX
&
RX
PIN#1
ON
[
]
For
system
firmware
update
OFF
[
]
Normal
PIN#2
ON
[
]
Reserved
OFF
[
]
RS
‐
232/IR
function
ON
PIN#3
ON
[
]
Disable
IR
function
OFF
[
]
Enable
IR
function
17.
LED indicator:
[Red]: Power LED indicator
[Green]: Link LED indicator
18.
SFP IN:
Plug in single mode fiber optic cables that needs to be linked to the transmitting unit
EX-56SZ-TX
