PANEL DESCRIPTIONS
Transmitting unit
►
CV-57VE2-100-TX
Front Panel
1. RJ45:
Plug in a Cat-5/5e/6 cable that needs to be linked to the transmitting unit RX.
2. LED:
TX /RX link indicator
3. Ethernet port for LAN:
Connect to network device
4. DIP Switch:
PIN#1: Setup the RS-232 mode for serial communication channel.
PIN#2: For Firmware Update
5. RS-232:
Connect to serial port device with a DSUB-9 male-male or male-female cable here
F/W update for Valens.
Rear Panel
6. IR Blaster:
Infrared 3.5mm socket for plugging in the extension cable of IR blaster
7. IR Receiver:
Infrared 3.5mm socket for plugging in the extension cable of IR receiver
8. HDMI IN:
Connects to a HDMI source with a HDMI male-male cable
9. Mini-USB:
F/W update
10. LED:
Power indicator
11. +24V DC:
Connect to a 24V DC power supply.
3
Содержание CV-57VE2-100
Страница 9: ...CONNECTION DIAGRAM 7...
