Golz FS 175, Перевод оригинальной инструкции по эксплуатации

Страница: 20 / 50

FS175
Translation of the original operating instruction and spare parts list
- 20-
5007287-00
BA-E
®
The supply of water at the cut ensures that the tool is cooled, the dust of the material is bound and the cut is
rinsed out.
Cutting with wet-cutting blades:
Connect the water supply to the GEKA-coupler (1) of the machine. Check the ball valve (2) is closed (ball
valve lever in 90°-position to the water flow).
For cutting open the ball valve (2) (ball valve lever in the water flow position).
Cutting with dry-cutting blades:
Fill the water tank with clean water. Connect the GEKA-coupler of the water tank to the GEKA-coupler of the
machine. Check the ball valve is closed (ball valve lever in 90°-position to the water flow).
For cutting open the ball valve (ball valve lever in the water flow position) and the valve of the water tank (3).
3
2
1
Attention: Use only water for cutting which is free from coarse impurities! Do not use salt
water!
Danger: Do not use the attached water tank when cutting with wet cutting diamond
blades. The segments may crack off and cause injuries to the operator or bystanders!