43
44
ing tone selection.
R
ntercom function.
I
It's possible to select for each monitor between four different ring tones.
To select a ring tone (system in rest):
1. Press the push button to play the selected ring tone.
2. Press the push button to play the next ring tone. Repeat this stage till find the
desired ring tone.
3. To save the desired ring tone and exit press the push button .
The monitor exit of the ring tone selection to the 40 seconds, saving the last selected
ring tone.
1370 SII Colour monitor, incorporate as standard the intercom function between two monitors
of the same apartment. To enable this function check the following conditions:
- The monitor that is connected to door panel(s) has been configurated as master and
slave the other monitor.
- Link the 1, 2 and 3 terminals of the units (see page 45).
To stablish an intercom communication press push button on the calling monitor: acoustic
tones will be reproduced confirming the call is in progress, the called monitor will receive
the call. To establish communication, press push button of the called monitor.
at any of the
monitors. If during an intercom communication a call is made from the door panel, the
intercom function will be cancelled, appearing the picture in both monitors.
To establish audio communication with the door, press push button.
.
.
The communication will last for 150 seconds or until press push button
MONITOR INSTALLATION
MONITOR INSTALLATION
ix the monitor.
F
Place the monitor align attaching holes of the monitor with the attachment hooks of the bracket
installation.
With help of a plain screwdriver, fix the monitor
with especified screws, as shown on the picture.
onitor wiring.
M
Connect the installation wires to the terminal connector,
according to the installation diagrams.
creen settings.
S
During call reception, communication and autoswitch-on processes,
it allows
with menu/select push button and increase or decrease
push buttons, (the value of the selected option) placed in the low
left zone of the monitor, (see page 40).
adjust the b
and colour of the screen
rightness, contrast
Press the menu/select push button , and will display the brightness,
contrast, colour and exit options,
press push button, once
placed on the desired option then press the up or down push buttons to increase or
decrease the value of the desired option.
To save the desired value and exit, select the option Exit with help of push button and confirm
by pressing at any of the push buttons (up or down ).
to move on the menu options
