golmar Nexa Modular, Инструкция по сборке

Страница: 6 / 12

DOOR PANEL INSTALLATION DOOR PANEL INSTALLATION
old the frame on the embedding box.
H
Insert the hinge that it is supplied with the product in the embedding
box, as shown in the drawing.
To hold the frame on the embedding box, insert the hinge in the
housings arranged for this purpose in the frame, as shown in
the drawing.
The frame can now be folded horizontally facilitating the connection
and adjustments in the sound module and push buttons electronic
module.
onnection and configuration.
C
For connection push buttons, nameplate labels, configuration, adjustments and
programming, see the manual supplied with the sound module.
lose the frame.
C
oor panel assembly.
D
Insert a header in the lateral rods (at the bottom part) and fix it with the supplied screws (step 1 ), then
insert the module (step
2 ). If the door panel is more than one module insert first the lower module,
see picture A .
Place the spacer module (step 3 ) and insert the next module (step 4 ) see picture B . Repeat this
procedure in case of door panels with one more module (the maximum number of modules placed
vertically is three).
To finish insert the second header (step
5 ) in the lateral rods (at the top part) and fix it with the
supplied screws, see picture C .
2,9 x 13
DIN-7981
A B C
1
2
3
4
5
2,9 x 13
DIN-7981
Lateral Rod
Lateral Rod
25
26
Once finished the works of wiring, configuration and final
adjustments, fix the frame in the embedding box with the
supplied screws.