This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
- (1) this device may not cause harmful interference, and
- (2) this device must accept any interference received, including interference
that may cause undesired operation.
Caution: changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Do not mix old and new batteries.
Do not mix alkaline standard (carbon-zinc) or rechargeable (nickel-cadmium)
batteries.
Non-rechargeable batteries are not to be recharged.
Rechargeable batteries are only to be charged under adult supervision.
Rechargeable batteries are to be removed from the toy before being charged.
Different types of batteries or new and used batteries are not to be mixed.
Batteries are to be inserted with the correct polarity. Exhausted batteries are to
be removed from the toy. The supply terminals are not to be short-circuited.
© 2019 Goliath, Vijzelpad 80, 8051 KR Hattem, the Netherlands. Pressman Toy Corp, 3701 West Plano
Parkway, Suite 100, Plano, TX 75075, USA. Crown & Andrews Pty Ltd., Unit D, 21 Loyalty Road, North
Rocks, NSW 2151, Australia. Elephanta Marketing Ltd., PO Box 7277, Wellington South, 6242, New
Zealand. Vivid Toy Group Ltd., GU3 1LS, UK. Packaging must be retained since it contains important
information. Color and contents may vary. Made in China. www.goliathgames.com
Requires 2 AA batteries (not included).
31031
3103110 v7 0519
ATTENTION!
This device is marked with the selective sorting symbol on waste electrical and electronic equipment.
This means that this product should be supported by a selective collection system in accordance with
applicable regulations in order to be either recycled or dismantled in order to reduce any impact on
the environment. The batteries, submitted to a specific collection system, must be removed from the
product and disposed of separately. When that the batteries are not to be extracted, the product must
be delivered to an appropriate collection center for recycling is complete. Electrical and electronic
products as well as batteries that have not been sorted before disposal are potentially dangerous for
the environment and human health due to the presence of hazardous substances. For more information,
contact your local or regional government.
CAUTION
1. Do not reset Mad Dog while he is still jumping/barking. Only reset after he moves
forward completely and finishes barking.
2. If Mad Dog does not function correctly, slide the power switch to OFF, reset and
slide the power switch to ON again.
For 2+ Players
Ages 4 and Up
Warning.
Small parts. Choking hazard.
