▶ Checking the Charging Status Through LED
GETTING STARTED
▶ How To Charge
• Open the protection cover located
below the Eyepiece
• Plug in the charging cable to start
charging(5V, 2A charger recommended,
cable not included)
• It will charge normally without pushing the
charging cable all the way into the terminal.
※ It may be damaged if excessive force is applied.
• Charging: Green color LED always on.
• Fully charged: Green color LED always on.
※ Up to 4,000 times measurement
available after fullcharging.
▶ How To Operate
1. Click the Power / Measurement button
2. Select the Mode(Standard ↔ Scan)
3. Place the target on the targeting crosshair
4. Click the Power / Measurement button to
display the distance
▶ How to change distance unit
• Press and hold Mode button for 3 seconds
