Goldwing YAK 55M 70 E, Инструкция по эксплуатации

Страница: 16 / 31

ARF® MODEL
mounting are laser pre-drilled, it is advisable to apply some thin CA to strengthen them, Install
the servos and screw firmly in place.
1.7 Use your radio to set the centers of each servo and then assemble and adjust the length of each
control rod, KUZA 1” aluminium CNC servo arm is recommended for aileron control (sold
separately). The servo arm should be as close to perpendicular to the control rod as possible
while the aileron is at neutral. Double check all screws, bolts and nuts to assure proper
installation and operation without binding.Once satisfied, permanently attach the ball links to
the servo arms and horns with the supplied screw and nut.
1.8 Check the final radio operation of the ailerons and make sure there is no binding or servo
fighting of each other. Also check to make sure all linkage bolts and nuts are secure.
1.9 Repeat this process for the other wing half.