Goldwing RC Electric Extreme EXTRA330SC 40E, Руководство пользователя

Страница: 31 / 38

All contents copyright 2015, GOLDWING RC Version 2.0, Sep 2015
geometry. When satisfied, screw the ball link to the servo arm and control horn. KUZA 1”
aluminium CNC servo arm is recommended for elevator control, the servo arm should be as
close to perpendicular to the control rod as possible while the elevator is at neutral. Double
check all screws, bolts and nuts to assure proper installation and operation without binding.
5 Motor Mounting
5.1 Blind nuts are pre-installed behind the firewall.
5.2 Since the position of cowl is fixed and length of motors varies, you may need to use motor
mounting to position you motor properly.