Goldwing RC 91in CORVUS 50-60CC, Руководство пользователя

Страница: 32 / 48

2. Fit the Cowl and measure the distance from the engine bulkhead to the front of the cowl, add approx 2-
3mm for the spinner back plate and this is the length that your engine should be set Using the correct
length stand offs, mount your engine securely using bolts, 20mm POM washers, and locknuts. The use of
thread-lock is also highly essential for the engine bolts.
3. Mount the ignition module according to the manufacturer’s instructions. The best place to mount it is on
the side of the engine box. Secure the pickup lead and ignition wires with zip ties so that they do not vibrate
or touch any hot part of the engine or exhaust.
5. Assemble the throttle servo mount using the supplied laser cut parts or there is a servo cutout in the
bottom of the engine box for 50cc-70cc engines. Mount your throttle servo and complete your linkage setup.
A hole will need to be drilled on the firewall to allow the pushrod to connect to the throttle arm on the carb.