21
● Cable Length Measure
● Choice the Kind of Cables before do this (Cable Length Measure) function.
● Choice the Mode of Cable Tester:
●
Touch the ‘Mode’ Icon of Cable Tester Menu on the LCM,
To Launch the function of Mode (Cable Tester) choice.
●
Touch the ‘UP’ or ‘Down’ Icon of Cable Tester on the LCM,
To select the Mode of Cable Tester which one of three(Link, Length, Toner)
Here select the Mode is Length from the three(Link, Length, Toner)
●
Touch the ‘Enter’ Icon of Cable Tester on the LCM, → as (
Fig 1 )
To decide the choice is Length Measure.
● Execute the Length Measure of Cables:
●
Touch the ‘Enter’ Icon of Cable Tester on the LCM,
To Execute the Length Measure of Cables → as (
Fig 2, 4 )
●
You will understand How the Length is of Cables,
After you do the Length Measure of Cables.
●
Touch the ‘UP’ Icon of Length Test on the LCM, → as (
Fig 3, 5 )
To select the Cable Length are (Average of Pairs) or (each Pairs) in the Cable.
●
Touch the ‘Down’ Icon of Length Test on the LCM, → as (
Fig 6 )
To select the Cable Length or Conditions of FAIL when Cable has been tested are FAIL.
Fig 1
Fig 4
Fig 2
Fig 5
Fig 3
Fig 6
Meter
Meter
Meter
Meter