Goldstar WG1005R, Руководство пользователя

Страница: 16 / 50

Installation
Type C
Screw(Type A)
Screw(Type A)
Power C ord
Foam-Strip
Window L ocking B racket
9. Attach each Frame C urtain the window sash
using screws (Type C).(See Fig ure 6)
: DO NOT DRILL A HOLE IN THE
BOTTOM PAN. The unit is designed to operate
with approximately 1/2" of water in bottom pan.
10. Slide the unit into the cabinet.(See Fig ure 7)
: For security purpose, reinstall
screws(Type A) at cabinet's sides.
11. Cut the Foam-Strip to the proper length
and insert between the upper window sash
and the lower window sash.
(See Fig
ure 8)
12. Attach the W indow L ocking B racket with
a T ype C screw. (See Fig ure 9)
13. Attach the front grille to the cabinet by
inserting the tabs on the grille into the tabs
on the front of the cabinet. Push the grille
in until it snaps into place. (See Fig
ure 10)
14. Lift the inlet grille and secure it with a T ype
A screw through the front grille.
(See Fig
ure 11)
15. Window installation of room air conditioner
is now completed. See ELECTRICAL DATA
for attaching power cord to electrical outlet.
Fig ure 6
Fig ure 7
Fig ure 8
Fig ure 9
Fig ure 10
Fig ure 11
Tip!
Tip!
16 Room Air Conditioner