manualshive.com logo in svg

Goldstar MV1502B, Руководство по обслуживанию, Страница: 4 / 43

Поделиться
Скачать
Goldstar MV1502B Скачать руководство пользователя страница 4

1-1

Rated Power Consumption  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1,500W maximum (Microwave oven+Cook top lamp+Ventilation fan)
Microwave Output  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1,000W (IEC 60705)

Adjustable 100W through 1000W, 10 steps

Frequency  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2,450 MHz ± 50 MHz
Power Supply  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 120 VAC, 60 Hz
Rated Current  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 13 Amp. (Microwave oven+Cook top lamps+Ventilation fan)
Magnetron Cooling  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Forced Air Cooling
Rectification - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Rectification Voltage Double Half-Wave
Door Sealing - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Choke System
Safety Devices - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Oven Cavity Thermostat:

Open at 90°C ± 5°C

Fuse(20A)
Primary Interlock Switch
Secondary Interlock Switch
Interlock Monitor

Magnetron  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2M214-39F
High Voltage Capacitor  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Capacitor: 1.0µF, 2.1 KV AC
High Voltage - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Diode Diode; 350mA, 9.0 KV
Cook top Lamp  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 125 V, 30 W
Cavity Lamp  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 125 V, 30 W
Timer  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Digital, up to 99 mim. 99 sec. (in each cooking stage)
Tray  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Tempered Safety Glass
Overall Dimensions  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 29

15

/

16

"(W)x16

7

/

16

"(D)x15

3

/

8

"(H) 

Oven Cavity Size  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 19

7

/

8

”(W)x14

3

/

16

”(D)x8

15

/

16

”(H)

Effective Capacity of Oven Cavity  - - - - - - - - - - - - - - - - - - - - - - - 1.5 Cu.ft.
Accessories  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Owner’s Manual & Cooking Guide, Installation Manual, 

Exhaust Adapter, Exhaust Damper, Mounting Kit and Two
Filters, Rotating Ring Assembly.

SPECIFICATIONS

Содержание MV1502B












































Отзывы:

Нет отзывов