Goldstar GT18+, Руководство пользователя

Страница: 8 / 23

GoldStar 8
Menu Settings:
When you press M button, you can move in the menu. You can change the values by
pressing up and down buttons.
Auto: It enables signal to reset. That means it resets automatically. It keeps
the balance in zero. If you want the balance to be kept, auto should be at
least 1. Resetting speed has 5 stages. Especially if Auto is 3, the coil should
be moved continuously. Screen bar disables and only sound enables
.
Sns: Setting for Sensitivity. It has 5 stages. The more sensitivity it has, the
more powerful signals it has, but when sens is increased, the parasite will
be more, so it effects the stability. Level 4 for Sensitivity is recommended.
FIL: Setting for Filter. It has 5 stages. Removes the parasite effects. As filter
got high, a little bit delay will be in signals, but it enables clear signals . If the
FIL is 0, it means it is disabled. We recommend you to set it up in the level 4
in closed places and near to the electiricity cables. In delay and ground
mode, level 3 is recommended.
TRS: Threshold for the sound. In factory reset, it is on the level of 6 in Delay
mode. It has 8 stages. In Gr(Ground) Mode, level 7 is recommended. TRS is
also sensitivity setting in Ground mode.
FRQ: Setting for Frequency. It is for removing the parasites comes from
electiricity places and radio waves. You can fix it if you have sudden
parasites.
VOL: Setting for Volume.
TON: It has 3 different tones/sounds.