7
Drill
Automatic shut off
Dehumidifier automatically shuts off when the bucket is full.
This prevents the danger of overflow.
The bucket must be in the proper position for the Water Level Control Switch to work.
The Water Lever Control Switch will automatically turn off the dehumidifier before the Bucket full(3/4).
Disposing of collected water
Before removing bucket from the dehumidifier, the unit should be turned off.
After bucket is placed properly, turn on the unit.
1.
Empty the bucket manually.
When the bucket is full, remove and
empty it into a large sink or tub.
When finished, replace it properly.
NOTE: The bucket must be
positioned properly making sure
slots on the back of bucket are
positioned correctly.
2.
Place the dehumidifier directly
over drain.
The bucket has a threaded hose
connection which can be left open.
Drill a 1/4" (6.4mm) to 1/2"(13mm)
hole in the center of the hose
connection.
Once opened, the hose connection
will continually drain water from the
bucket.
3.
Attach a garden hose to the
threaded bucket drain hose
connection to carry water to
the drain.
When being attached to the bucket
drain hose connection, be sure the
hose doesn’t kink or bend. It should
lie flat from the dehumidifier to the
drain.
