REPLACING THE VIDEO SIGNALS CABLE
18. If the signals cable needs replacing, disconnect
the cable and unscrew the screws A fixing it.
REMOVING THE CRT
NOTE:
In addition to the cathode ray tube, the
CRT also comprises the deflection yoke
and the geometric distortion regulation
magnets. These magnets should not
need to be adjusted.
19. Remove the video amplifier board and main
board as described previously.
20. Remove the 4 screws V securing the CRT to the
front casing of the monitor, and release it from
the casing.
21. Remove the CRT aquadag D, after releasing the
spring keeping it taut.
A
Fig. 20-7 Replacing the Video Signals Cable
D
V
V
V
V
Fig. 20-8 Removing the CRT
20
Video Unit - Pocket Service Guide
14" COLOUR DISPLAY UNIT - CDU 1435SE/GS11
20-5
