GOLDSTAR GPS The Rocket Скачать руководство пользователя страница 4

4

Installation Do’s and Don’ts

DO

• G

round directly to the frame

• Make solid splices and insulate them well
• Secu

re the device and all wiring

• Ensu

re the proper light sequence before closing up the dash

• Use a constant 12v power supply

DON’T

• Use small sc

rews for grounding that are not attached to the frame

• Use a pulsating 12v power supply
• Splice wi

res together loosely without insulating properly

• Let the device and wiring hang loosely

Support: 877.563.0012

Содержание The Rocket

Страница 1: ...f Contents Standard Installation 2 Standard Starter Disable Installation 3 Starter Disable with ECM Installation 3 Installation Do s and Don ts 4 GLD C S 0710 ROCKET in GPS tracking Gold Standard the 877 563 0012 Toll Free Support TM ...

Страница 2: ...device to power it up Once powered up the LED indicators will show a fast flashing green light indicating good GPS signal and a slow flashing blue for good cellular coverage If the green light remains solid you are not getting a GPS signal If you are unable to get a GPS and cellular signal after waiting 5 minutes reposition and try again It may take up to 15 minutes to get an initial GPS lock Soli...

Страница 3: ...ng out Once you ve located the proper 12 volt wire after the ECM proceed with the regular starter interrupt instructions given above using this wire YOU WILL NEED TO HAVE A VOLTAGE METER NOT A TEST LIGHT IF YOU TAP A WIRE WITH A LOW VOLTAGE 3 5 V0LTS YOU MAY LOCK DOWN THE VEHICLE Support 877 563 0012 Wiring SOCKET RELAY IGNITION SWITCH CUT TO STARTER RED GREEN GREEN WHITE BLACK ground RED 12V YELL...

Страница 4: ...d all wiring Ensure the proper light sequence before closing up the dash Use a constant 12v power supply DON T Use small screws for grounding that are not attached to the frame Use a pulsating 12v power supply Splice wires together loosely without insulating properly Let the device and wiring hang loosely Support 877 563 0012 ...

Отзывы: