Gold's Gym GGTL39608.0 Скачать руководство пользователя

Страница: 19 / 28

HOW TO FOLD AND MOVE THE TREADMILL

HOW TO FOLD THE TREADMILL FOR STORAGE

Before folding the treadmill, adjust the incline to the

lowest position. If you do not do this, you may damage the

treadmill when you fold it. Remove the key and unplug the

power cord. CAUTION: You must be able to safely lift 45 lbs.

(20 kg) to raise, lower, or move the treadmill.

Hold the metal frame firmly in the location shown by the

arrow at the right. CAUTION: To decrease the possibility

of injury, do not lift the frame by the plastic foot rails.

Make sure you bend your legs and keep your back

straight.

Raise the frame about halfway to the vertical posi-

tion.

2. Move your right hand to the position shown and hold the

treadmill firmly. Using your left hand, pull the latch knob to

the left and hold it. Raise the frame until the hole in the plat-

form cushion is aligned with the latch pin, and then slowly re-

lease the latch knob.

Make sure that the latch pin is fully

inserted into the platform cushion.

To protect the floor or carpet from damage, place a mat

under the treadmill. Keep the treadmill out of direct sun-

light. Do not leave the treadmill in the storage position in

temperatures above 85° F (30° C).

HOW TO MOVE THE TREADMILL

Before moving the treadmill, convert it to the storage position as

described above.

Make sure that the latch pin is fully in-

serted into the platform cushion. Remove the dumbbells.

1. Hold one of the handrails and place your other hand on the

frame. Place one foot against one of the wheels.

2. Tip the treadmill back until it rolls freely on the wheels.

Carefully move the treadmill to the desired location.

To re-

duce the risk of injury, use extreme caution while mov-

ing the treadmill. Do not move the treadmill over an un-

even surface. Do not pull back on the frame.

3. Place one foot against one of the wheels, and carefully lower

the treadmill until it is resting in the storage position.

HOW TO LOWER THE TREADMILL FOR USE

See drawing 2.

Hold the treadmill with your right hand as shown. Pull the latch knob to the left and hold it.

Pivot the frame downward until it is past the latch pin. Then, release the latch knob.

See drawing 1. Hold the metal frame firmly with both hands

, and lower it to the floor.

CAUTION: To de-

crease the possibility of injury, do not lower the frame by gripping only the plastic foot rails; do not

drop the frame to the floor. Make sure to bend your legs and keep your back straight.

Handrails

Frame

Wheels

Engaged

Platform Cushion

Latch

Knob

Frame

Содержание GGTL39608.0





























Результаты поиска

Содержание GGTL39608.0

Отзывы:

Похожие инструкции для GGTL39608.0

Бренды по названию

Популярные бренды

Gold's Gym GGTL39608.0, Руководство пользователя

Результаты поиска

Содержание GGTL39608.0

Отзывы:

Похожие инструкции для GGTL39608.0

Бренды по названию

Популярные бренды